Email:Jenny@aosif.com.cn Xiamen Aosif Engineering Ltd

Xiamen Aosif Engineering Ltd

Product Categories
Contact Us

Xiamen Aosif Engineering Ltd

Address:Unit 1001,No.1 of Cheng Yi North Street,Software Park Phase III ,Xiamen ,China

Tel: 86-592-2620130

Fax: 86-592-2620112

sales@aosif.com.cn

High Performance DSE7320 Auto Mains Utility Failure Control Modules

High Performance DSE7320 Auto Mains Utility Failure Control Modules

DSE7320 Deep Sea Auto Mains Failure Control Panel The DSE7320 is an Auto Mains (Utility) Failure Control Module designed for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine...

Product Details

DSE7320 Deep Sea Auto Mains Failure Control Panel

The DSE7320 is an Auto Mains (Utility) Failure Control Module designed for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).

The DSE7320 will monitor the mains (utility) supply and includes USB, RS232 and RS485 ports as well as dedicated DSENet® terminals for system expansion.

Main Features:

4-Line back-lit LCD text display

Five key menu navigation

Front panel editing with PIN protection

LED and LCD alarm indication

Customizable status screens

Power save mode

Support for up to three remote display units

9 configurable inputs

8 configurable outputs

Flexible sender inputs

Configurable timers and alarms

3 configurable maintenance alarms

Multiple date and time scheduler

Configurable event log (250)

Control logic facilities

Easy access diagnostic page

CAN and Magnetic Pick-up/Alt. sensing

Fuel usage monitor and low fuel alarms

Charge alternator failure alarm

Manual speed control (on compatible CAN engines)

Manual fuel pump control

Engine exerciser

“Protections disabled” feature

KW & kV Ar overload protection

Power monitoring (kW h, kV Ar, kV A h, kV Ar h)

Load switching (load shedding and dummy load outputs)

Automatic load transfer

Unbalanced load protection

Independent Earth Fault trip

USB connectivity

Backed up real time clock

Fully configurable via DSE Configuration Suite PC software

Configurable display languages

Remote SCADA monitoring via DSE Configuration Suite PC software

User selectable RS232 and RS485 communications

SMS Messaging (additional external modem required)

Additional display screens to help with modem diagnostics

DSENet® expansion compatible

Key Benefits:

132 x 64 pixel ratio display for clarity

Real-time clock provides accurate event logging

Multiple date and time scheduler

Set maintenance periods can be configured to maintain optimum engine performance

Ethernet communications (via DSE860/865 modules), provides advanced remote

Monitoring at low cost

Modules can be integrated into building management systems (BMS)

Increased input and output expansion capability via DSENet®

License-free PC software

IP65 rating (with supplied gasket) offers increased resistance to water ingres

Specification:

DC SUPPLY

CONTINUOUS VOLTAGE RATING 

8 V to 35 V Continuous

CRANKING DROPOUTS 

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.  LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT 

340 mA at 12 V, 160 mA at 24 V

MAXIMUM STANDBY CURRENT 

160 mA at 12 V, 80 mA at 24 V

CHARGE FAIL/EXCITATION RANGE 

0 V to 35 V

MAINS (UTILITY) 

VOLTAGE RANGE

15 V - 333 V AC (L-N)

FREQUENCY RANGE

3.5 Hz to 75 Hz

OUTPUTS

OUTPUT A (FUEL)

15 A DC at supply voltage

OUTPUT B (START)

15 A DC at supply voltage

OUTPUTS C & D

8 A 250 V (Volt free)

AUXILIARY OUTPUTS E,F,G,H

2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE

15 V - 333 V AC (L-N)

FREQUENCY RANGE

3.5 Hz to 75 Hz

MAGNETIC PICK-UP

VOLTAGE RANGE

+/- 0.5 V to 70 V

FREQUENCY RANGE

10,000 Hz (max)


Should you're searching for the high performance dse7320 auto mains utility failure control modules for your appliance, please be free to buy the product with us. As one of the leading manufacturers, we will offer you the best after-sale service and fast delivery. Now, check the price list with us.

Related Products
Copyright © Xiamen Aosif Engineering Ltd. All rights reserved.
QR Code